Ratio Electric-Handleiding EV080-3 talen

www.ratio.nl 20 www.ratio.nl DESCRIPTION This charging station is used for charging electric vehicles (EV’s) and is compatible with the common IEC61851 standard. This unit includes a charging station, 1 (single phase) or 3 (3-phase) current clamps (CT’s) and a sensorbox V2. The sensorbox measures the current (direction) of the power in the electrical cabinet and transmits this information to the charging station. When other appliances are switched on, the power to the EV will automatically be reduced. It is also possible to charge the EV on pure solar power. The charging station uses the sensorbox to try to send all generated power from the solar panels to a charging EV. INSTALLATION 1. The installation must be done by a qualified and licensed electrician according the local legislation. 2. The electrical installation must be free of power during the entire installation period. 3. Since this Charging Unit uses circuits that reference to ground, no Megging must be done after connecting to power. 4. Wiring and protection: Version Wiring * Mains Circuit Breaker (MCB) Residual Current Device (RCD) 32A / 1 Phase 3G6,00mm 2 40A B/C-Characteristic 30mA, Type A 32A / 3 Phase 5G6,00mm 2 40A B/C-Characteristic 30mA, Type A * For cable length upto 25m PLEASE NOTE: All charges include an AC (> 30mA) and DC (> 6mA) residual-current-detection. Always place a type A RCD and the MCB (or combination unit) in the electrical cabinet.